[rd200mike]

List of stuff I've got for an Aircooled RD200 or RD125:

RD200DX 1E8 Frame that's been blasted and painted black

1x 1980 RD200DX Swingarm that's been stripped to metal.

2x 1E8 Engines (with all cases)

1x Fuel Tamk (Resprayed by me white with red stripe gold tz decals. Not perfect, but I liked it..)

2X Sets of Side Panels

1x Set of Spoked Wheels

1x Extra Rear Spoked Wheel

1x Rear Cast Wheel

1x Sprocket Carrier

1x Set of Switches (these are on eBay now)

2x Rear Wheel Spindle

2x Swingarm Spindle (one is is brand new)

2x Front Wheel Spindle

2x Sets of forks (both kinds)

2x Sets of coils

2x Regulator/Rectifier

1x Wiring Harness

1x Original Seat Base (Highly Corroded)

1x Fibreglass repro Seat base fitted with hinges and seat lock catch

1x Seat foam

2x Sets of Carbs (RD200)

1x Airbox with Inlet Rubbers

2x Reed Valve Assemblys

1x Oil Tank (with sender unit

1x Battery Cage (Blasted and resprayed black)

1x Rear Plastic Mudguard

2x Engine Mounting Plates (Blasted painted)

1x Ignition Switch with Key

1x Fuel Cap with Key

1x Seat Lock with Key

1x Side Stand Assembly Includes Footrest Mount

1x Footrest Bar and Fasteners

1x NOS Clutch Pushrod

3x Rear Brake Levers

1x Centre Stand Mounting Bolt

1x Set of Orignal Exhaust Mounts Blasted and need paint

2x Sets of Standard Exhausts

3x Sets of Downtubes (at least 2 are definately RD200dx)

1x Early Brake Caliper

3x Rear Brake Hubs

2x Brake Hub Stays

1x Yoke set

2x Sets of Exhaust Collars

Got a couple of boxes of other odds and ends. That's most of it anyway..

If you want anything, just send me a message and I'll get back to you asap. Thanks, Mike

[jonellie1]

Hi Mike
Were abouts are you,i am interested in the exhausts.I only need a left hand but would expect your selling in pairs,how much either way?cheers
jonellie

[rd200mike]

Here are some pictures of the items for sale

RD200DX Frame

RD200DX Fuel Tank

RD200DX Swingarm

RD200DX Forks

I'll get some more pictures up of the rest at some point..

[Crothers]

Hi I would be interested in the Exhausts and downpipes and the side panels as i am currently restoring an RD200DX.

also possibly the engine as i have a second donor bike that i'll try and fix up after

whats sort of price are you looking for them... also i live over in northern ireland so i'd need to sort out collection

[shed hermit]

Crothers, on Feb 26 2009, 06:41 PM, said:

Hi I would be interested in the Exhausts and downpipes and the side panels as i am currently restoring an RD200DX.

also possibly the engine as i have a second donor bike that i'll try and fix up after

whats sort of price are you looking for them... also i live over in northern ireland so i'd need to sort out collection

hi crothers i have a set of 250 pipes if your intrested. havent looked at them in a while so cant remember if they are scratched ect. im in donegal so i might be a bit closer for you.

P.S. RD200mike im not trying to steal a customer im thinking about the postage ect.

[rd200mike]

shed hermit, on Feb 26 2009, 06:51 PM, said:

hi crothers i have a set of 250 pipes if your intrested. havent looked at them in a while so cant remember if they are scratched ect. im in donegal so i might be a bit closer for you.

P.S. RD200mike im not trying to steal a customer im thinking about the postage ect.

I'm no expert but I don't know whether the 250 pipes will fit on a 200DX.

While I was getting spares together for my DX, I looked at the possibility and I was told they don't fit. Check with these guys, RD Forum

[shed hermit]

hi mike
i was thinking that. the brackets may not be the same but the actual expansion pipes might work and the down pipe diameter may be differant i dont know. i wouldnt tell him they would fit if i didnt know, i was just saying i had pipes here if it helped him any.

[Crothers]

Hi

Can you tell me what condition the two engines are in please and is there any chance i you could put a few pics up of the exhaust and downpipe please so i can sorta see their condition compaired to my own.

thanks

[Crothers]

Hi

I'd also be looking to the ignition switch and seat locks with keys. do you still have those

[rd200mike]

Crothers, on Mar 1 2009, 02:53 PM, said:

Hi

I'd also be looking to the ignition switch and seat locks with keys. do you still have those

I've got an ignition switch, but no keys. the key went with the fuel tank at the buyers request. sorry.

here's a pic of the good downpipes

[rd200mike]

rd200mike, on Mar 1 2009, 05:29 PM, said:

I've got an ignition switch, but no keys. the key went with the fuel tank at the buyers request. sorry.

here's a pic of the good downpipes

let me know if you want them, i'll ebay them otherwise

[Crothers]

i've sent you a pm about the parts

[Rennie]

Mike,

I would be interested in 1x Early Brake Caliper as I am rebuilding a FS1E-DX and have been informed that the calipers are the same.

Please let me know how much you want for it and if you know the parts are the same.

Perhaps a piccy would be good.

Many thanks and look forward to your reply.

Regards,

Steve

[wild foamy]

hi there.

RE: RD200 Forks, what diameter are the stanchions, how long are the forks and how far between the wheel spindle and caliper mounts? any pitting/marks, how much you asking and what would postage to RG14 cost?

regards

Steve

[canaweb]

I have a '74 RD200 (Electric).. missing a right side cover. Do you think the covers you have would fit?
You also have carbs for the 200?

Thanks!!

[Raymond]

rd200mike, on 29 January 2009 - 11:57 AM, said:

List of stuff I've got for an Aircooled RD200 or RD125:

RD200DX 1E8 Frame that's been blasted and painted black

1x 1980 RD200DX Swingarm that's been stripped to metal.

2x 1E8 Engines (with all cases)

1x Fuel Tamk (Resprayed by me white with red stripe gold tz decals. Not perfect, but I liked it..)

2X Sets of Side Panels

1x Set of Spoked Wheels

1x Extra Rear Spoked Wheel

1x Rear Cast Wheel

1x Sprocket Carrier

1x Set of Switches (these are on eBay now)

2x Rear Wheel Spindle

2x Swingarm Spindle (one is is brand new)

2x Front Wheel Spindle

2x Sets of forks (both kinds)

2x Sets of coils

2x Regulator/Rectifier

1x Wiring Harness

1x Original Seat Base (Highly Corroded)

1x Fibreglass repro Seat base fitted with hinges and seat lock catch

1x Seat foam

2x Sets of Carbs (RD200)

1x Airbox with Inlet Rubbers

2x Reed Valve Assemblys

1x Oil Tank (with sender unit

1x Battery Cage (Blasted and resprayed black)

1x Rear Plastic Mudguard

2x Engine Mounting Plates (Blasted painted)

1x Ignition Switch with Key

1x Fuel Cap with Key

1x Seat Lock with Key

1x Side Stand Assembly Includes Footrest Mount

1x Footrest Bar and Fasteners

1x NOS Clutch Pushrod

3x Rear Brake Levers

1x Centre Stand Mounting Bolt

1x Set of Orignal Exhaust Mounts Blasted and need paint

2x Sets of Standard Exhausts

3x Sets of Downtubes (at least 2 are definately RD200dx)

1x Early Brake Caliper

3x Rear Brake Hubs

2x Brake Hub Stays

1x Yoke set

2x Sets of Exhaust Collars

Got a couple of boxes of other odds and ends. That's most of it anyway..

If you want anything, just send me a message and I'll get back to you asap. Thanks, Mike

[Raymond]

Hi
I know it is sometime since you originally posted the list of parts for a RD200. Have you still got some parts, especially the seat foam?

Best regards

Ray

[Mark Housby]

Hi, I'm after a pair of IE7 carbs. Could you post of photo of the ones you've got. Thanks

[drewpy]

topic now closed as over 6 months old.

PM the seller if you require anything